tsmf1000, tsmf1020, tsmf1030 www.vishay.com vishay semiconductors rev. 1.8, 30-jun-11 1 document number: 81061 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high speed infrared emitting diode, rohs compliant, 890 nm, gaalas double hetero description tsmf1000 series are infrared, 890 nm emitting diodes in gaalas double hetero (dh) technology with high radiant power and high speed, molded in clear, untinted plastic packages (with lens) for surface mounting (smd). features ? package type: surface mount ? package form: gw, rgw, yoke, axial ? dimensions (l x w x h in mm): 2.5 x 2 x 2.7 ? peak wavelength: ? p = 890 nm ? high radiant power ? angle of half intensity: ? = 17 ? low forward voltage ? suitable for high pulse current operation ? versatile terminal configurations ? package matches with detector temd1000 ? floor life: 168 h, msl 3, acc. j-std-020 ? compliant to rohs directive 2002/95/ec and in accordance with weee 2002/96/ec applications ? irda compatible data transmission ? miniature light barrier ? photointerrupters ? optical switch ? control and drive circuits ? shaft encoders note ? test conditions see table basic characteristics note ? moq: minimum order quantity 16758-5 tsmf1000 tsmf1030 tsmf1020 product summary component i e (mw/sr) ? (deg) ? p (nm) t r (ns) tsmf1000 5 17 890 30 tsmf1020 5 17 890 30 tsmf1030 5 17 890 30 ordering information ordering code packaging remarks package form tsmf1000 tape and reel moq: 1000 pcs, 1000 pcs/reel re verse gullwing tsmf1020 tape and reel moq: 1000 pcs, 1000 pcs/reel gullwing tsmf1030 tape and reel moq: 1000 pcs, 1000 pcs/reel yoke
tsmf1000, tsmf1020, tsmf1030 www.vishay.com vishay semiconductors rev. 1.8, 30-jun-11 2 document number: 81061 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - power dissipation limit vs. ambient temperature fig. 2 - forward current limit vs. ambient temperature absolute maximum ratings (t amb = 25 c, unless otherwise specified) parameter test condition symbol value unit reverse voltage v r 5v forward current i f 100 ma peak forward current t p /t = 0.5, t p ? 100 s i fm 200 ma surge forward current t p = 100 s i fsm 0.8 a power dissipation p v 180 mw junction temperature t j 100 c operating temperature range t amb - 40 to + 85 c storage temperature range t stg - 40 to + 100 c soldering temperature t ? 5 s t sd 260 c thermal resistance junction/ambient soldered on pcb, pad dimensions: 4 mm x 4 mm r thja 400 k/w 0 20 40 60 80 100 120 140 160 180 200 0 102030405060708090100 21165 t amb - ambient temperature (c) p v - power dissipation (mw) r thja = 400 k/w 0 20 40 60 80 100 120 0 10 203040 50607080 90100 t amb - ambient temperature (c) 21166 i f - forward current (ma) r thja = 400 k/w basic characteristics (t amb = 25 c, unless otherwise specified) parameter test condition symbol min. typ. max. unit forward voltage i f = 20 ma v f 1.3 1.5 v i f = 1 a, t p = 100 s v f 2.4 v temperature coefficient of v f i f = 1 ma tk vf - 1.8 mv/k reverse current v r = 5 v i r 10 a junction capacitance v r = 0 v, f = 1 mhz, e = 0 c j 160 pf radiant intensity i f = 20 ma i e 2.5 5 13 mw/sr i f = 100 ma, t p = 100 s i e 25 mw/sr radiant power i f = 100 ma, t p = 20 ms ? e 35 mw temperature coefficient of ? e i f = 20 ma tk ? e - 0.6 %/k angle of half intensity ? 17 deg peak wavelength i f = 20 ma ? p 890 nm spectral bandwidth i f = 20 ma ?? 40 nm temperature coefficient of ? p i f = 20 ma tk ? p 0.2 nm/k rise time i f = 20 ma t r 30 ns fall time i f = 20 ma t f 30 ns cut-off frequency i dc = 70 ma, i ac = 30 ma pp f c 12 mhz virtual source diameter d 1.2 mm
tsmf1000, tsmf1020, tsmf1030 www.vishay.com vishay semiconductors rev. 1.8, 30-jun-11 3 document number: 81061 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 basic characteristics (t amb = 25 c, unless otherwise specified) fig. 3 - pulse forward current vs. pulse duration fig. 4 - forward current vs. forward voltage fig. 5 - radiant intensity vs. forward current fig. 6 - radiant power vs. forward current fig. 7 - rel. radiant intensit y/power vs. ambient temperature fig. 8 - relative radi ant power vs. wavelength 0.01 0.1 1 10 1 10 100 1000 10 000 t p - pulse length (ms) 100 95 9985 i f - forward current (ma) dc t p /t = 0.005 0.5 0.2 0.1 0.01 0.05 0.02 t amb < 60 c v f - forward voltage (v) 94 8880 10 1 10 0 10 2 10 3 10 4 i f - forward current (ma) 4 3 2 1 0 16189 10 3 10 1 10 2 10 4 10 0 0.1 1 10 1000 100 i f - forward current (ma) i e - radiant intensity (mw/sr) - radiant power (mw) e i f - forward current (ma) 94 8007 10 3 10 1 10 2 10 4 10 0 0.1 1 10 1000 100 - 10 10 50 0 100 0 0.4 0.8 1.2 1.6 i e rel ; 140 94 7993 i f = 20 ma e rel t amb - ambient temperature (c) 800 900 - wavelength (nm) 1000 20082 0 0.25 0.5 0.75 1.0 1.25 e rel - relative radiant power
tsmf1000, tsmf1020, tsmf1030 www.vishay.com vishay semiconductors rev. 1.8, 30-jun-11 4 document number: 81061 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 9 - relative radiant in tensity vs. angular displacement precautions for use 1. over-current-proof customer must apply resistor s for protection, otherwise slight voltage shift will cause big current change (burn out will happen). 2. storage ? storage temperature and rel. humidity conditions are: 5 c to 35 c, r.h. 60 %. ? floor life must not exceed 168 h, acc. to jedec level 3, j-std-020. once the package is opened, the products should be used within a week. otherwise, they should be kept in a damp proof box with desiccant. considering tape life, we suggest to use products within one year from production date. ? if opened more than one week in an atmosphere 5 c to 35 c, r.h. 60 %, devices should be treated at 60 c 5 c for 15 h. ? if humidity indicator in the package shows pink color (normal blue), then devices should be treated with the same conditions as 2.3. reflow solder profile fig. 10 - lead tin (snpb) reflow solder profile fig. 11 - lead (pb)-free reflow solder profile acc. j-std-020 s rel - relative sensitivity 94 8248 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 0 0.2 0.4 ? - angular displacement 60 80 100 120 140 160 180 200 220 240 260 0 20 40 60 80 100 120 140 160 180 200 220 time (s) temperature (c) 17172 + 5 c/s 5 s 60 s to 120 s - 5 c/s 22566 120 s max. 60 s max. above 220 c 260 c max. 10 s max. pre-heating 180 c to 200 c 1 c/s to 5 c/s 1 c/s to 5 c/s
tsmf1000, tsmf1020, tsmf1030 www.vishay.com vishay semiconductors rev. 1.8, 30-jun-11 5 document number: 81061 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters: tsmf1000 package dimensions in millimeters: tsmf1020 16159 16160 3.8 0.2 ? 1.9 0.2 0.3 0.15 0.05 0.75 1.4 2.7 0.2 0.85 2.5 0.2 1.1 2 0.2 0.5 0.4 ca 4.5 0.1 2.3 0.1 1 0.1
tsmf1000, tsmf1020, tsmf1030 www.vishay.com vishay semiconductors rev. 1.8, 30-jun-11 6 document number: 81061 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters: tsmf1030 reel dimensions in millimeters 16228 issue: 3; 11.06.08 drawing-no.: 9.800-5080.01-4 leader and trailer tape: parts mounted empty trailer (200 mm, min.) empty leader (400 mm, min.) direction of pulling out unreel direction 60.2 0.5 178 1 2 . 5 0.5 label posted here coming out from reel tape position x x 13 0.5 13.2 1.5 16 0.2 18033
tsmf1000, tsmf1020, tsmf1030 www.vishay.com vishay semiconductors rev. 1.8, 30-jun-11 7 document number: 81061 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping dimensions in millimeters: tsmf1000 taping dimensions in millimeters: tsmf1020 18030 3.05 0.1 0.3 ? 1.55 0.05 4 0.1 2 0.05 4 0.1 1.75 0.1 5.5 0.05 12 0.3 top tape push pin through hole quantity per reel: 1000 pcs or 5000 pcs feed direction anode 18031 3.05 0.1 0.3 ? 1.55 0.05 4 0.1 2 0.05 4 0.1 1.75 0.1 5.5 0.05 12 0.3 top tape push pin through hole quantity per reel: 1000 pcs or 5000 pcs feed direction anode
tsmf1000, tsmf1020, tsmf1030 www.vishay.com vishay semiconductors rev. 1.8, 30-jun-11 8 document number: 81061 for technical questions, contact: emittertechsupport@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping dimensions in millimeters: tsmf1030 18032 3.05 0.1 0.3 ? 1.55 0.05 4 0.1 2 0.05 4 0.1 1.75 0.1 5.5 0.05 12 0.3 top tape push pin through hole quantity per reel: 1000 pcs or 5000 pcs feed direction anode
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
